Nitto's Ammonia Detection Tape allows for the visual detection of ammonia gas leaks by changing color when in contact with ammonia gas. This tape allows for a proactive safety approach for ammonia gas leaks.

Features:
See the leak:?Tape quickly changes color, from white to blue/green, in as little as one minute when exposed to NH3 (depending on the flow rate, temperature, time and percentage of ammonia).

Proactive Safety:?Can be placed before leak issues are known, and left in place for up to 6 months, allowing for earlier detection than other reactive solutions. 

Long-Lasting Color Change:?Unlike other solutions, once exposed to ammonia gas, the color change will last at least 72 hours in most cases even if gas flow is stopped.

Intermittent leak Finder: With traditional methods, leaks at locations with intermittent flow can be difficult to detect, this product makes it easy since the color change is long lasting.

Outdoor leak Finder: With traditional methods, outdoor leak detection can be difficult due to wind, this product acts like a barrier to wind, making detection in windy conditions easy.

Easy to Use:?Applies as easily as a regular pressure sensitive adhesive tape.

Environmentally Resistant:?Can be used in both indoor and outdoor environments.

Applications:

Nitto's ammonia detection tape can be easily applied to, or wrapped around, pipes, flanges, fittings, valves, access panels, etc. to immediately identify an exact ammonia leak location.
The long-lasting color-change properties identify the exact leak location even if the NH3?line is shut off.
Applications include and are not limited to refrigeration, ice rinks, transportation, power, fertilizer, and more.

*CAUTION: The above are typical values and should not be used in writing specifications. Customer is responsible to ensure product meets intended application requirements before approved for use.

Precaution:
This product is intended for use as a localized ammonia gas indicator, and should be used as part of a comprehensive gas detection system. DX-8208A will not prevent NH3 leaks. Customers should not rely solely on this product to monitor the safety of a facility where flammable or hazardous gases are present.
Surface should be clean, free of oil, moisture and dirt before applying. Pressure-sensitive adhesive tapes may require pressure by roller, hand or press when applying. Not doing so may affect the general properties and appearance. Please inspect your surface prior to application; this tape may not adhere well to extremely uneven or distorted surfaces.